Adjustment

4 1

2

1 5

7

5 6

3

Fig. 11 - 08

adjustable clamp is touching the needle bar bearing.

● Position the hook point at the middle of the needle, taking care to ensure that the needle is not pressed by needle guard 7.

●While ensuring that bevel pinion 5 is not too close, and that the hook does not exhibit too much play, tighten screws 2.

●On machines with automatic thread trimmer -900/56, bring retaining collar 6 to rest on bevel pinion 5 and tighten screws 3.

●Adjust the needle height in accordance with requirement 2 (see also chapter 11.04.04).

●Align needle guard 7 in accordance with requirement 3.

Bei der PFAFF 1246 ist nach Veränderung des Nadelabstandes unbedingt die

Verbindungsstange zum Fadenabschneider (siehe auch Kap.11.05.10)

neu zu justieren.

11 - 10