![](/images/backgrounds/48970/48970-8241x1.png)
The illustrations in this section show the PFAFF 1245
●Screwdrivers with blade widths from 2 to 10 mm
●Screwdrivers with blade widths from 7 to 14 mm
●Allan keys from 2 to 6 mm
●Metal rule, (Part No.
●Adjustment gauge, (Part No.
●Adjustable clamp, (Part No.
●Gauge, (top feed stroke 7 mm) (Part No.
●Needles, system
●Sewing thread and test material
11.02 Notes on adjustingAll adjustments in these adjustment instructions are based on a completely installed machine and must only be carried out by appropriately trained specialists. Covers on the machine which have to be removed and replaced for checks and adjustment work are not mentioned here. The screws and nuts in brackets ( ) are attachments of machine parts which are to be loosened before making the adjustment and tightened again when the adjustment is complete.
11.03 AbbreviationsTDC = top dead center
BDC = bottom dead center
11 - 1