Adjustment
●Allow the presser foot to rest on the needle plate.
●By continuing to turn the handwheel, position the point of thread catcher 5 at the same height as the edge of rear stop trip 6 of the needle plate and press release bar 8 to the left in accordance with requirement 2 using retaining collar 7.
●In this position tighten screws 1.
The eccentricity of retaining collar 7 must be pointing downwards.
● Carry out a check in accordance with the requirement.
8
| 6 |
5 | 9 |
1 7
Fig. 11 - 30 A
11 - 37