Pfaff 1245, 1246 10.02 Cleaning, Care and maintenance, 10 Care and maintenance, 10.01 Servicing and maintenance intervals

Care and maintenance10 Care and maintenance10.01 Servicing and maintenance intervals

Check the air pressure .............................................................................	daily before use
Clean the hook compartment ........................	daily, more often if in continuous operation
Check the water container of the air filter ................................................	daily before use
General lubrication .......................................................................................	twice a week
Lubricate the front parts ..............................................................................	twice a week
Check the hook oil-container .........................................................................	once a week
Clean the hook ..............................................................................................	once a week
Lubricate the top-feed drive eccentric ..................................................................	Annually

These maintenance intervals are calculated for the average running time of a single shift operation. If the machine is operated more than this, shorter intervals are recommended.

10.02 Cleaning

3	2	1	4	Turn the machine off!
				● Clean the hook compartment daily with a
				brush, more often if in continuous
				operation.
				● Thoroughly clean the hook once a week.
				● Open the bed slide.
				● Bring the needle bar to its highest
5				position.
				● Remove the bobbin case cap and the
				bobbin.
				● Unscrew hook gib 1.
				● Turn the handwheel until point 2
				penetrates into groove 3 approx. 5 mm.
				● In this position, remove bobbin case 4.
Fig. 10 - 01				● Clean the hook race with paraffin.

●When inserting the bobbin case, ensure that horn 5 meshes in the groove of the needle plate (see arrow).

●Finally, screw hook gib 1 back on.

●Insert the bobbin case and close the bed slide.

10 - 1