Adjustment

11.04.9 Top-feed stroke

Requirement

At the largest top-feed stroke setting and stitch length „0“, presser foot 1 and vibrating presser foot 2 must lift 7.0 mm from the needle plate when the handwheel is turned.

4

3

7 mm

2

1

Fig. 11 - 9

7 mm

●Set the largest top-feed stroke and the stitch length at „0“.

●Bring presser foot 1 to rest on the needle plate.

●Turn the handwheel in the direction of rotation until vibrating presser foot 2 has reached its highest point.

●Turn crank 3 (screws 4) in accordance with the requirement.

●Carry out a check in accordance with the requirement.

11 - 11