Preparation

9.04 Removing/Threading the bobbin case

1

2

Turn the machine off!

 

Removing the bobbin case.

● Open the bed slide.

● Raise latch 1 and remove bobbin case 2.

Inserting the bobbin case.

● Insert bobbin case 2 so that it clicks into place.

● Close latch 1 and close the bed slide.

Fig. 9 - 03

9.05 Inserting the bobbin case / Adjusting the bobbin thread tension
5 cm

1

Turn the machine off!

Threading the bobbin case.

●Thread the bobbin as shown in Fig. 9 - 04.

●When the thread is pulled, the bobbin must rotate in the direction of the arrow.

Regulating the bobbin thread tension.

●Regulate the bobbin thread tension with screw 1.

Fig. 9 - 04

9 - 4