Philips 44PL9522 Descriptions of Jacks, Cables, and Connectors, Cables used RF coaxial cable 75Ω

Descriptions of Jacks, Cables, and Connectors

This page contains descriptions and illustrations of jacks, cables, and connectors you might use in making connections. The cables and connectors are not supplied with your TV, but you can pur- chase at your electronics dealer. Or you can order them by calling our Customer Care Center at 1-800-531-0039.

Tuner (RF) Input Jack	Antenna RF Jack
Cables used: RF coaxial cable (75Ω)	Cable Used: RF
Allows you to connect an antenna, cable TV,	Coaxial (75Ω)
or components having RF outputs to the	TUNER
antenna input on the TV. RF coaxial cables
are available in push-on or screw-on type.
Push-on		Screw-on
Type Cable Or		Type Cable

DVI-D Input Jack

Cable used: DVI-D

This jack works only with DVI TMDS

(Transition Minimized Differential Signaling) digital video. Allows encrypted transmissions of uncompressed digital content. The DVI-D jack used in this product is not for computer connections.

DVI-D Jack

Cables Used: DVI-D

DVI

Signal Splitter		Signal Splitter
Allows you to route an antenna or cable TV	Cables Used: RF
signal to two inputs.	Coaxial (75Ω)

Component Video Input Jacks	Component Video Jacks
Cables used: component video with	Cables Used: Component
RCA-type phono plugs	Video with RCA-type
	Phono Plugs
Allow you to connect accessory devices such
as DVD players. Separating the video into
three signals, these inputs provide excellent	Pr Pb Y
quality. Be sure to connect the left and right
audio cables, because the Y, Pb, Pr jacks
receive only the picture signal.
NOTE: See the “Helpful Hint” on page 13
for more information.

300- to 75-ohm Twin-lead Adapter	300- to 75-ohm
Accepts twin-lead wires from an antenna and	Twin-lead Adapter
allows connection to the antenna input on the	TUNER
TV. If your antenna is already equipped with
an RF coaxial cable you will not need this
adapter.

S-Video Input Jacks	S-VIDEO Jack
Cable used: S-Video	Cable Used: S-Video
Provide a higher quality picture than the	G S-VIDEO
Video (composite) jacks because the color
part of the picture is separated from the black
and white portion. Be sure to connect the left
and right audio cables, because the S-Video
jacks receive only the picture signal.
RGB+HV Input Jack	VGA/HD15 Jack
	Cable Used: HD DB15

Audio Input Jacks

Cables used:Audio with RCA-type phono plugs

Provide sound for the video inputs. If your acces- sory device has only one output for audio, connect it to the left (color coded white) audio jack on the TV.

Your TV also has monitor output (“MON OUT”) audio (“L” and “R”) jacks and a subwoofer output (“SUB OUT”) jack. Use an audio cable with RCA- type phone plugs to make connections.

Audio Jacks

Cables Used:

Audio with RCA- type Phono Plugs

R L

Cable used: HD DB15
Allows you to connect equipment with RGB
or VGA output.	RGB+HV

3.5mm Stereo Mini Phone	3.5mm Stereo Mini Phone Plug
Plug to RCA Jack Adapter	to RCA Jack Adapter

Allows a connection between the 3.5mm stereo audio out jack on a com- puter and the left and right audio inputs on the television. Connect A/V cables

Video (called “CVBS” or “composite”) Input Jacks

Cable used:Video with RCA-type phono plugs

Provide better picture performance than the antenna RF input. Be sure to connect the audio cables, because the video jacks receive only the picture signal.

Your TV also has a monitor output (“MON OUT”) video (“V”) jack. Use a video cable with RCA-type phone plugs to make connections.

Video (Composite) Jack

Cable Used:Video with

RCA-type Phono Plugs

V

with RCA-type phono plugs to the adapter, then to the TV.

Center Channel Amp Speaker	Center Channel Amp Speaker
Terminals (+ and –)	Terminals (for the connection
Allow a connection from a surround	of speaker wires)
sound receiver. Set the EXT/INT switch				+
to EXT to use the TV speakers as the	INT
center speakers in a surround sound			_
arrangement.
		EXT

7