Epson Research and Development Page 25
Vancouver Design Center
Hardware Functional Specification S1D13505
Issue Date: 01/02/02 X23A-A-001-14
DB[15:0] IO 16-31 C/TS2 Hi-Z
These pins are the system data bus. For 8-bit bus modes, unused data
pins should be tied to VDD.
• For SH-3/SH-4 Bus, these pins are connected to D[15:0].
• For MC68K Bus 1, these pins are connected to D[15:0].
• For MC68K Bus 2, these pins are connected to D[31:16] for 32-bit
devices (e.g. MC68030) or D[15:0] for 16-bit de v ice s (e . g. M C68 340 ).
• For Generic Bus, these pins are connected to D[15:0].
• For MIPS/ISA Bus, these pins are connected to SD[15:0].
• For Philips PR31500/31700 Bus, these pins are connected to
D[31:16].
• For Toshiba TX3912 Bus, pins [15:8] are connected to D[23:16] and
pins [7:0] are connected to D[31:24].
• For PowerPC Bus, these pins are connected to D[0:15].
• For PC Card (PCMCIA) Bus, these pins are connected to D[15:0].
See “Host Bus Interface Pin Mapping” for summary. See the respective
AC Timing diagram for detailed functionality.
WE1# IO 9 CS/TS
2Hi-Z
This is a multi-purpose pin:
• For SH-3/SH-4 Bus, this pin inputs the write enable signal for the
upper data byte (WE1#).
• For MC68K Bus 1, this pin inputs the upper data strobe (UDS#).
• For MC68K Bus 2, this pin inputs the data strobe (DS#).
• For Generic Bus, this pin inputs the write enable signal for the upper
data byte (WE1#).
• For MIPS/ISA Bus, this pin inputs the system byte high enable signal
(SBHE#).
• For Philips PR31500/31700 Bus, this pin inputs the odd byte access
enable signal (/CARDxCSH).
• For Toshiba TX3912 Bus, this pin inputs the odd byte access enable
signal (CARDxCSH*).
• For PowerPC Bus, this pin outputs the burst inhibit signal (BI#).
• For PC Card (PCMCIA) Bus, this pin inputs the card enable 2 signal
(-CE2).
See “Host Bus Interface Pin Mapping” for summary. See the respective
AC Timing diagram for detailed functionality.
M/R# I 5 C Hi-Z
• For Philips PR31500/31700 Bus, this pin is connected to VDD.
• For Toshiba TX3912 Bus, this pin is connected to VDD.
• For all other busses, this input pin is used to select between the
display buffer and register address spaces of th e S1D135 05. M/R # is
set high to access the display buffer and low to access the registers.
See Register Mapping.
See Table5-6:, “CPU Interface Pin Mapping,” on page 34.
CS# I 4 CHi-Z
• For Philips PR31500/31700 Bus, this pin is connected to VDD.
• For Toshiba TX3912 Bus, this pin is connected to VDD.
• For all other busses, this is the Chip Select input.
See Table5-6:, “CPU Interface Pin Mapping,” on page 34. See the
respective AC Timing diagram for detailed functionality.
Table 5-1: Host Interface Pin Descriptions (Continued)
Pin Name Type Pin # Cell RESET#
State Description