Customizing Pronto NG
Selecting the Brand and searching the Code Set for your device
Note Make sure the device for which you are searching the brand is turned on.
1Tap and hold the Pronto NG icon 
in the upper left corner of the touch screen for 3 seconds. The Tools Menu appears.
2Tap 
in the Tools Menu. The ‘Brand Tool’ screen appears.
3Tap 
in the ‘Brand Tool’ screen. The Device Overview appears.
4In the Device Overview, tap the Device for which you want to define the brand.
A message screen appears.
5Tap 
.
The ‘Brands’ screen appears.
6Select the brand of your device as described in ‘Selecting the brand’ on page 19.
Searching the code set
1Tap 
in the ‘Code Sets’ screen. The ‘Searching the Code Set’ screen appears.
2Tap 
and point Pronto NG at the device.
The ‘Searching’ screen appears. Pronto NG searches through the list of code sets for the selected brand, by sending out an IR code for each code set.
3When the device for which you are defining the brand, turns off,
tap 
in the ‘Searching’ screen. The ‘Installing the Brand’ screen appears.
4To install the brand and code set, follow the instructions described in ‘Installing the brand’ on page 19.
Searching the Brand and Code Set for your device
1Tap and hold the Pronto NG icon 
in the upper left corner of the touch screen for 3 seconds. The Tools Menu appears.
2Tap 
in the Tools Menu. The ‘Brand Tool’ screen appears.
3Tap 
in the ‘Brand Tool’ screen. The Device Overview appears.
User Guide |
20 |
