Customizing Pronto NG
4In the Device Overview, tap the Device for which you want to define the brand.
A message screen appears.
5Tap 
.
The ‘Brands’ screen appears.
Searching the brand
1Tap 
in the ‘Brands’ screen. The ‘Searching the Brand’ screen appears.
2Tap 
and point Pronto NG at the device.
The ‘Searching’ screen appears. Pronto NG searches through the list of brands, by sending out an IR code for each brand.
3When the device for which you are defining the brand, turns off,
tap 
in the ‘Searching’ screen. The ‘Installing the Brand’ screen appears.
4To install the brand and code set, follow the instructions described in ‘Installing the brand’ on page 19.
Learning Commands
If an IR code is not in the database, you can program Pronto NG commands by transmitting IR signals from your existing remote control to Pronto NG’s learning eye.
The Learn Tool allows you to learn a button |
| |
or a device action. A device action is an |
| |
action that is executed automatically when |
| |
you select a device. E.g. when you select TV, |
| |
your Pronto NG can learn to switch on the TV |
| |
at the same time. You can also use the Learn | 4 - 8 inches | |
Tool to relearn commands that do not work |
| |
10 - 20 cm | ||
properly. |
Learning eye
Note Changing the Brand in the Brand Tool will not have an impact on the learned codes.
User Guide |
21 |
