10
3. STORING TV CHANNELS
In order that your video recorder can record
TV programmes, the TV channels (e.g. "ARD") must
first be stored in the video recorder.
You can store up to 99 TV channels.
Your video recorder has a receiver of its own. This
means it can be used independently of the TV set.
The "Easy Link" function
This function enables your video recorder to exchange
information with the TV set. For this reason, also take
note of the operating instructions that accompany your
TV set.
The TV set and video recorder (tscart
socket) must be connected using the special scart
cable suppliedand your TV set must have the
"Easy Link" function.
!Switch on the TV set.
"Pull out the mains plug and plug it back in again.
¤The video recorder automatically loads all of the TV
channels stored in the TV set in the correct order.
This can take a few minutes.
The following display appears on screen:
"EASY LINKL Loading from TV – please wait",
"EASY LINK" appears in the video-recorder's
display.
Once all TV channels have been found, the video
recorder switches itself off.
$Select the desired display language. To do this,
press the button Son the video
recorder.
%The OSD page "LANGUAGE" appears on screen.
Select the desired display language.
&Confirm the setting by pressing the button B.
The OSD page "COUNTRY" appears on screen. Sel-
ect your country.
/Confirm the setting by pressing the button B.
"EASYLINK" appears briefly in the videorecorder
display.
It is still possible at this stage to assign special
functions to certain channel numbers. For further infor-
mation, see the section "Manual search".
Automatic channel search
(ATS Euro+)
The ATS Euro + function is not possible if the connect-
ed TV set has "Easy Link".
The video recorder will make a search for all TV
channels. It stores them in a logical sequence in the
memory.
!Switch the TV set on and select the channel number
for the video recorder.
"Press the button Son the video
recorder.
¤The OSD page "LANGUAGE" appears on the screen.
Select the display language desired.
$Confirm by pressing the button B.
The OSD page "COUNTRY" appears on screen.
Choose your country.
%Confirm by pressing the button B.
The automatic tuning begins.
&Wait until all TV channels have been found. This
may take a few minutes.
Once all TV channels have been found, a message,
e.g. "ATS Euro+ ready 28 TV channels found"
appears on screen. The automatic channel search
is over.
/Press the button B. The OSD page
"INSTALLATION MENU" appears on screen.
(Complete the setting by pressing the button
l.
LANGUAGE
English Nederlands
Deutsch Dansk
Français Norsk
Italiano Svenska
Español Suomi
Português
"%%
&&
!
Confirm - OK