Philips VR 969/02 operating instructions Insert-edit functions, Methode 1 Insert VCR

Insert-edit functions

With the insert-edit functions, it is possible to conven- iently insert other picture and/or sound recordings into existing recordings.

Connect the two units with the corresponding synchro- edit cable (socket Dor /on your video recorder).

Connect the video/audio source to the input sockets

©("E3") or ("E4") and »+ ¼(audio input for "E3" and "E4") on the video recorder. The sockets are to be found behind the flap at the front of the recor- der.

If your camcorder is equipped with a 2.5 mm ø control socket (LANC control) or a 5-pin MEI-socket, you have the choice between the following insert-edit methods:

•Method 1 "INSERT VCR": you mark on the cassette in the video recorder the tape position where the "new" recording is to end.

•Method 2 "INSERT CC": you mark on the cassette in the camcorder the beginning and the end of a "scene" (tape position) you wish to insert into an existing recording.

However, this works only if the camcorder is equip- ped with a 2.5 mm ø control socket (LANC control) or a 5-pin MEI-socket.

You have the choice between three insert-edit functions:

•"INSERT DUBBING": the picture, the hifi sound (helical track), and the mono sound (longitudinal track) are newly recorded.

•"INSERT VIDEO": the picture and the hifi sound (helical track) are newly recorded, the mono sound (longitudinal track) is maintained.

•"INSERT COPY": The picture is newly recorded. The mono sound (longitudinal track) is retained and transferred onto the hifi track (helical track).

Note:

*The video recorder will always use that insert function you have selected in the paragraph "Adjusting the video recorder to the camcorder".

Please also see the operating instructions of the cam- corder.

Insert the recorded cassette into the video recorder. Make sure the cassette is not protected against recording!

!Switch on the TV set and select the programme position intended for the video recorder.

"Switch the video recorder on.

Select the programme position "E3" or "E4".

¤Press the lbutton.

The OSD page "MAIN MENU" appears on the picture screen. Select the menu option "A/V Edit". Confirm with the Gbutton.

$The OSD page "EDIT MENU" appears on the picture screen. Select the option "Insert Edit". Con- firm with the Gbutton.

The OSD page "INSERT EDIT" corresponding to the connected camcorder type appears on the picture screen.

Follow the user guide on the OSD page.

%Provided your camcorder has a 2.5 mm ø control socket (LANC control) or a 5-pin MEI-socket: Confirm the menu option "Insert VCR" or select the option "Insert CC".

Confirm with the Gbutton.

Methode 1 'Insert VCR':

&Use the ¨button to select the OSD page "Recorder" (for video recorder mode). Search on the cassette in the video recorder the tape position where the recording is to end. Mark this position with the)button.

/Search on the cassette in the video recorder the tape position where the recording is to begin. Switch the video recorder to playback-pause.

(Use the ;button to select the OSD page "Player" (for camcorder mode).

Search on the cassette in the camcorder the tape position where the recording is to begin.

Use the slider controls {}to adjust the recording level so that the "0 dB" mark lights up during the loudest passages of the recording.

Switch the camcorder to still picture (playback- pause).

ENGLISH

33