Philips VR 969/02 Deleting individual scenes, Preview of scenes in the editing sequence

Deleting individual scenes

!Call up the OSD page "PROGRAMME EDIT". The line "Edit scene" is active.

Confirm with the Gbutton.

"The OSD page "PROGRAMME EDIT" (editing sequence) appears on the screen.

Select the scene, which you want to delete.

¤Press the mbutton. The scene is deleted.

$Quit with the lbutton.

Preview of scenes in the editing sequence

With this function you can look at all scenes on the editing sequence before re-recording.

If the connected camcorder does not have a time code, the video tape in the camcorder must be rewound to the tape position which has been used as the zero point during editing transfer.

The tape length counter on the camcorder must be set to zero.

!Call up the OSD page "PROGRAMME EDIT". Select the line "Preview scenes".

Confirm with the Gbutton.

"The OSD page "PREVIEW" appears on the screen. The video recorder switches the camcorder automatically to replay and plays the scenes in the same order as the editing sequence.

¤At the end of the last scene the video recorder ends the replay and switches automatically to the OSD page "PROGRAMME EDIT".

$If you want to quit earlier, press the l button.

Recording all scenes

With this function you can re-record all scenes which are in the editing sequence onto a video cassette.

If the connected camcorder does not have time code, the video tape in the camcorder must be rewound to the tape position which has been used as the zero point.

The tape length counter on the camcorder must be set to zero.

!Call up the OSD page "PROGRAMME EDIT". Select the line "Record scenes".

Confirm with the Gbutton.

"The OSD page "RECORD SCENES" appears on the screen.

Find the correct tape position on the video recorder for recording start. Switch the video recorder to replay-pause.

¤Start the re-recording procedure with the gbutton on the video recorder. The video recorder plays scene for scene onto the video cassette.

$After re-recording of the last scenes the video recorder switches automatically to the OSD page

"PROGRAMME EDIT".

The editing sequence data is saved.

%If you want to quit before, press the l button.

Totally deleting the editing sequence

If you want to re-record "new" scenes, you must first delete the contents of the editing sequence.

!Call up the OSD page "PROGRAMME EDIT". Select the line "Delete list".

Confirm with the Gbutton.

"The OSD list "DELETE LIST" appears on the screen. If you want to fully delete the contents of the editing sequence then press the mbutton.

¤The OSD page appears again briefly, the contents of the editing sequence are fully deleted.

Then the video recorder switches automatically to OSD page "PROGRAMME EDIT".

$Quit with the lbutton.

36