Philips VR 969/02 operating instructions Vhs

Variant 1 as shown in figure Á or figure

Òif the video recorder is to control the camcorder.

%Start copying with the gbutton on the video recorder.

The camcorder starts with "PLAYBACK" and at the same time the video recorder starts with "RECORDING".

&Stop copying with the rbutton on the video recorder.

/End copying with the lbutton or the dbutton on the remote control.

Notes:

*If the beginning of the scene is missing, the pre- roll time is too long. Set a shorter time.

If recording is started too soon (before the scene to be copied), the preroll time is too short. In this case, the preroll time must be increased.

*If your camcorder is equipped with a 2.5 mm ø control socket (LANC control) or a 5-pin MEI- socket, the playback and fast wind functions of many camcorders can be controlled with the corre- sponding control elements on the video recorder.

3 x Cinch	ENGLISH
	S-VHS
	3,5mm/
	2,5mm
	2,5mm
	Synchro-
	Edit

V	SYNCHRO EDIT
L	MEI EDIT
R	S VHS

Á

3 x Cinch

MEI EDIT S-VHS

V	SYNCHRO EDIT
L	MEI EDIT
R	S VHS

Ò

31