![](/images/new-backgrounds/1231718/23171887x1.webp)
Switching the built-in modulator on and off
In the previous section, possible TV reception interference was discussed. If picture/sound inter- ference cannot be eliminated using the methods mentioned, the
!Press the buttons Vand G(Playback) on the video recorder simultaneously.
"Press the cursor button _for more than five seconds. A message, e.g. "MODUL OFF", appears in the video recorder display.
¤Press the cursor button _again for more than five seconds.
A message, e.g. "MODULATOR", appears in the video recorder display.
$Store the setting by pressing the button B.
Note:
*If your TV set has the "Easy Link" function, and the TV set and video recorder (scart socket t) are connected with the special Scart cable supplied, the modulator is automatically switched off.
Remote control of TV sets
You remote control can operate with a number of remote control codes for TV sets of different makes. Using the appropriate code number and the TV key group, you can adjust the volume, mute the TV sound, select the programme positions, and switch the TV set off.
ETV volume +/ - QTV sound on/off WTV off
RTV programme +/ -
!Direct the remote control at the TV set.
"Press the Wbutton and the numeric button at the same time.
List of several makes:
Numeric button TV make
0Philips, Radiola (F), Schneider (F)
1Grundig
2Panasonic
3Panasonic
4Sony
Note:
*For Panasonic, Sony, Radiola, and Schneider TV sets, the correct function of the remote control can- not be guaranteed for all types.
*If the selected code does not operate with your TV set, or if the TV make is not contained in the list, you can try out the codes one after the other.
44