Philips VR 969/02 Saving energy, Connecting to a decoder, Connecting to a satellite receiver

Saving energy

There are two ways of switching off to choose from. 1. Normal switch-off.

Switch off by pressing the button Ä. The time remains visible.

2. Energy-saving mode.

Press the button Äonce again.

The time in the display disappears. You can switch back on again by pressing the same button.

Note:

*It is not possible to switch to energy-saving mode as long as a TV set connected with a scart cable is switched on. "TV ACTIVE" appears in the video- recorder's display.

*After switching the video recorder in the

„Saving energy mode“, the analogic clock cannot set/correct itself automatically.

Connecting to a decoder

Some TV stations transmit encoded (encrypted) signals which you can only decode for viewing if you use a bought or hired decoder (descrambler).

RS 232

2 EXTERNAL / DEC.- AV 2

	AUDIO
L	L	1 EXTERNAL / EURO-AV 1
O	I
U	N	S-VHS OUT
T

RR

!Connect the decoder with a Scart cable to the usocket on the video recorder.

How to programme the decoder function when storing TV channels is described in the chapter "Storing TV channels".

Notes:

*It is not possible to use the decoder at the same time for the video recorder and the TV set.

*The video recorder will automatically use the decoder when a programme position is selected on the video recorder which has been assigned to the decoder function when storing TV channels.

Connecting to a satellite receiver

It is possible to connect a satellite receiver to this video recorder.

RS 232

2 EXTERNAL / DEC.- AV 2

	AUDIO
L	L	1 EXTERNAL / EURO-AV 1
O	I
U	N	S-VHS OUT
T

RR

!Connect the satellite receiver by means of a Scart cable to the video recorder (socket u).

"Switch the video recorder on and select the programme position "E 2".

Connecting to hifi equipment

You can play the sound of your video rcorder via your hifi equipment.

!Connect the L…and LÄsockets on the back of your video recorder with the corresponding sockets on your hifi equipment.

A cable can be purchased at a specialized dealer.

Emergency interrupt

The video recorder and the remote control have an emergency interrupt function. You can interrupt any function by pressing the dbutton.

Whenever you have any problems while operating the video recorder, you can simply interrupt any function and start again.

You can practise using the video recorder without worrying. No matter which button you press, you won't damage the video recorder.

8