Connecting to the TV set
If your TV set does not have a Scart (Euro-AV)
socket, do not read here but continue with chapter 8, "Additional functions of your video recorder". In the chapter "Playback via the aerial cable" you will find the required information.
!Insert one plug of the Scart cable supplied into the Scart socket ton the back panel of the video recorder. Insert the other plug of the Scart cable into the Scart socket on the TV set.
RS 232
2 EXTERNAL / DEC.- AV 2
| AUDIO |
|
L | L | 1 EXTERNAL / |
O | I |
|
U | N | |
T |
RR
"Many TV sets automatically switch over to the programme position "EXT" (External) or "AV" (Audio/Video) with the help of this cable connection when playback is started on the video recorder.
For other TV sets, select the programme position "EXT", "0" or "AV" for video playback manually on the TV set.
How this is done is to be found in the operating instructions of the TV set.
Notes:
*If your TV set has several Scart sockets, select the socket which has a video input and output function.
*If your TV set allows for selecting the video sour- ce via a menu, select "TV" as source for this Scart socket.
Connecting to the mains supply
ENGLISH
RS 232
2 EXTERNAL / DEC.- AV 2
| AUDIO |
|
L | L | 1 EXTERNAL / |
O | I |
|
U | N | |
T |
RR
! Insert the female plug of the mains cable into the mains socket Ÿat the rear of the video recorder.
"Insert the other plug of the mains cable into the wall socket.
Your video recorder is now properly connected.
Some notes on operation
•The video recorder should permanently be connect- ed to the mains supply to enable programmed recordings and TV operation. The energy consump- tion is very low.
•The video recorder is automatically switched on when inserting a cassette (the zsymbol lights up in the video recorder's display) or when pressing the rbutton.
8D 8W 88:88:8-:--
P |
| VPS |
| SVHS | STEREO I |
EI8 | PDC | ■ ■ | z | • NICAM II | |
| DEC |
| LP MONO HiFi |
•If the video recorder is not used for a few minutes, it is automatically switched off.
7
