2-8 CHAPTER 2: SETUP FOR CUSTOM INSTALLATION
Configuring the NIC
This section describes the procedure to install NIC software and
configure the NIC when Plug and Play has been disabled on
the NIC.
Follow these steps to install the NIC software and configure
the NIC:
1 Double-click the My Computer icon, double-click the
Control Panel icon, and then double-click the Add New
Hardware icon.
The Add New Hardware Wizard starts and displays the first screen.
2 Click Next.
You are prompted to let Windows 95 search for your
new hardware.
3 Select No, and then click Next.
The Add New Hardware Wizard displays the Hardware Types
list box.
4 Select Network adapters and click Next.
Windows 95 updates the driver database and then displays the
Select Device screen, as shown in Figure 2-7.
Figure 2-7 Select Device Screen