PictureTel III ISA manual Removing NIC Software, NIC software is removed from your PC

4-4CHAPTER 4: SOFTWARE INSTALLATION AND CONFIGURATION UNDER WINDOWS 3.X

Table 4-2Network Driver Text File Names (continued)

Network	Text File Name	Network Driver Name
Operating System
Windows 95 NDIS 2 16-bit	W95NDIS2.TXT	ELNK3.DOS
network driver
NetWare Client 32	CLIENT32.TXT	3C5X9.LAN
NetWare 3.12 Server	NETWARE.411	3C5X9.LAN
NetWare 4 Server	NETWARE.411	3C5X9.LAN
NetWare OS/2	NWOS2ODI.TXT	3C5X9.SYS
Packet driver NOSs	PACKET.TXT	3C5X9PD.COM

Removing NIC Software

EtherDisk diskette 2 includes an uninstallation program to remove the 3C509B NIC software.

To run the uninstallation program, at the DOS prompt, Enter:

un3c509.exe

The NIC software is removed from your PC.

Configuring the NIC

This section describes how to configure the 3C509B NIC after you install it in your PC. If only one 3C509B NIC is installed and you are running Novell NetWare, use the AutoLink program to configure the NIC and load the appropriate driver, as described earlier in this chapter.

To configure the 3C509B NIC, follow these steps:

1Install the NIC (see Chapter 1) and the network driver (earlier in this chapter).

2Reboot to DOS.

3Insert EtherDisk diskette 2 in drive A.

4Run the installation program. Enter: a:install

The main menu is displayed, as shown in Figure 4-1.

5Select Configuration and Diagnostic Program.

If you have more than one NIC installed in the PC, select the NIC you want to configure. Tab to the Select button and press Enter.

6Select Configure NIC and press Enter.

The NIC Configuration screen is displayed, as shown in Figure 4-2.