PictureTel III ISA manual Follow these steps to change the configuration settings

Changing Configuration Settings 4-9

Follow these steps to change the configuration settings:

1Run the installation program described in “Configuring the NIC” earlier in this chapter.

2From the main menu (see Figure 4-1), select Configuration and Diagnostic Program.

3If multiple NICs are installed in the PC, use the arrow keys to select the NIC you want to configure. Press Tab to move to the Select button and press Enter.

4Press Tab to display the dialog box, and then select the option that you want to change. Press Enter.

5Use the arrow keys to scroll through the list of settings for that option. Select a setting and press Enter.

6Continue this procedure for other options. For more information on a specific option, select the option and press F1.

7To save the new settings, select OK and press Enter.