Adjusting nonfading output level

Whenthe nonfading output is on, you can ad-
justthe level of nonfading output.
1 UseMulti-Control to select nonfading
outputsetting.
NonFad0 appears in the display.
2 PushMulti-Control up or down to ad-
justthe nonfading output level.
Eachpushing Multi-Control up or down in-
creasesor decreases the level of thenonfad-
ingoutput. +6 6is displayed as the level is
increasedor decreased.
Using the high pass filter
Whenyou do not want low sounds fromthe
subwooferoutput frequency range to play
fromthe front or rear speakers, turn on the
HPF(high pass filter). Only frequencies higher
thanthose in the selected range are outputted
fromthe front or rear speakers.
1 UseMulti-Control to select HPF.
HPFappears in the display.
2 PressMulti-Control to turn high pass fil-
teron.
HPF80 Hz appears in the display. High pass
filteris now on.
#Toturn high pass filter off, press
Multi-Controlagain.
3 PushMulti-Control left or right to select
cut-offfrequency.
Eachpushing Multi-Control left or right se-
lectscut-off frequencies in the following order:
5080125(Hz)
Onlyfrequencies higher than those in the se-
lectedrange are outputted from the front or
rearspeakers.
Note
Ifyou switch the SFEQ setting, the HPF function
isautomatically turned off. By turning the HPF
functionon after selecting the SFEQ setting, you
cancombine HPF function with SFEQ
function.
Adjusting source levels
SLA(source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM tuner volume
level,which remains unchanged.
1 Comparethe FM tuner volume level
withthe level of the source you wish to ad-
just.
2 UseMulti-Control to select SLA.
SLAappears in the display.
3 PushMulti-Control up or down to ad-
justthe source volume.
Eachpushing Multi-Control up or down in-
creasesor decreases the source volume.
SLA+4 SLA 4is displayed as the source vo-
lumeis increased or decreased.
Notes
!TheAM tuner volume level can also be ad-
justedwith source level adjustments.
!Thebuilt-in CD player and the multi-CD player
areset to the same source level adjustment
volumeautomatically.
!Externalunit 1 and external unit 2 are set to
thesame source level adjustment volume
automatically.
Audio Adjustments
En
52
Section
11