Important
!Neveruse force or grip the display and the
buttonstoo tightly when removing or attach-
ing.
!Avoidsubjecting the front panel to excessive
shocks.
!Keepthe front panel out of direct sunlight and
hightemperatures.
!Afew seconds after turning the ignition
switchto on or off, the front panel automati-
callymoves. When this happens, your fingers
maybecome jammed in the panel, so keep
yourhands away from it.
!Whenremoving the front panel, be sure to
holdthe corrugated release button on the rear
ofthe front panel while pulling.

Removing the front panel

1 PressEJECT to open the front panel.
2 Slideand remove the front panel to-
wardyou.
Takecare not to grip it too tightly or to drop
thefront panel and protect it from contact
withwater or other fluidsto prevent perma-
nentdamage.
3 Putthe front panel into the protective
caseprovided for safe keeping.

Attaching the front panel

1 Makesure the inner cover is closed.
2 Replacethe front panel by clipping it
intoplace.
About the demo mode
Thisunit features two demonstration modes.
Oneis the reverse mode, the other is the fea-
turedemo mode.
!Youcannot cancel a demo mode when the
frontpanel is open.
!Whenthe front panel is open, BAND,
ENTERTAINMENT,EQand EQ-EX are not
available.
Important
Thered lead (ACC) of this unit should be con-
nectedto a terminal coupled with ignition switch
on/offoperations. If this is not done, the vehicle
batterymay be drained.

Reverse mode

Ifyou do not per form an operation within
about30 seconds, screen indications start to
reverse,and then continue reversing ever y 10
seconds.Pressing BAND when power to this
unitis turned off while the ignition switch is
setto ACC or ON cancels the reverse mode.
PressBAND again to start the reverse mode.
Before YouStart
En 9
English
Section
01