!Donot insert anything other than a CD into
theCD loading slot.
!Thereis sometimes a delay between starting
upCD playback and the sound being issued.
Whenbeing read in, Format Read is dis-
played.
!Ifyou cannot insert a disc completely or if
afteryou insert a disc the disc does not play,
checkthat the label side of the disc is up.
PressEJECT to eject the disc, and check the
discfor damage before inserting it again.
!Ifthe built-in CD player does not operate prop-
erly,an error message such as ERROR-11
maybe displayed. Refer to Understanding
built-inCD player error messages on page 61.
!Youcan eject the CD by pressing and holding
EJECTwith opening the front panel when the
CDloading or ejecting cannot operate proper-
ly.
Adjusting the volume
%UseMulti-Control to adjust the sound
level.
Withthe head unit, rotate Multi-Control to in-
creaseor decrease the volume.
Withthe remote control, press VOLUME to in-
creaseor decrease the volume.
Volumebar and power outputmode (40W or
60W)are displayed while volume is adjusted.
!Pleaserefer to the installation manual for
thepower setting switch.
Turningthe unit off
%PressSOURCE and hold until the unit
turnsoff.
Basic Operations
En 15
English
Section
03