Black plate (82,1)

Section

13 Audio Adjustments

8Press MULTI-CONTROL to start the auto TA and EQ.

9Get out of the car and close the door within 10 seconds when the 10-second count-down starts.

The measurement tone (noise) is outputted from the speakers, and auto TA and EQ be-

gins.

# When all speakers are connected, auto TA

and EQ is completed in about six minutes.

# To stop auto TA and EQ, press

MULTI-CONTROL again.

# To cancel auto TA and EQ part way through, press BAND.

10When auto TA and EQ is completed, Setup complete is displayed.

When correct measurement of car interior acoustic characteristics is not possible, an error message is displayed. (Refer to Under- standing auto TA and EQ error messages on page 93.)

11Press BAND to cancel the auto TA and EQ mode.

12Store the microphone carefully in the glove compartment.

Store the microphone carefully in the glove compartment or any other safe place. If the microphone is subjected to direct sunlight for an extended period, high temperatures may

cause distortion, color change or mal- function.

82 En

<CRB2179-A/N>82

Page 82
Image 82
Pioneer DEH-P9850BT operation manual CRB2179-A/N82