Initial Settings Switching the reverse mode | Pioneer DEH-P9850BT

Initial Settings

Switching the reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds.

1Use MULTI-CONTROL to select Reverse mode.

Reverse mode appears in the display.

2Press MULTI-CONTROL to turn the re- verse mode on.

ON appears in the display.

# To turn the reverse mode off, press MULTI-CONTROL again.

Note

You can also turn on or off reverse mode by press- ing BAND while this unit is turned off. For more details, see Reverse mode on page 9.

Switching the Ever Scroll

When Ever Scroll is set to ON, CD text infor- mation scrolls continuously in the display. Set to OFF if you prefer the information to scroll just once.

1Use MULTI-CONTROL to select Ever-scroll.

Ever-scroll appears in the display.

2Press MULTI-CONTROL to turn the Ever Scroll on.

ON appears in the display.

# To turn the Ever Scroll off, press MULTI-CONTROL again.

Black plate (87,1)

		Section
		14
		English
Calibrating the RPMs		English

Follow the instructions below to measure the RPM of your vehicle and records them. By doing this, the tachometer of this unit can work properly.

!Tachometer of this unit cannot work if you do not perform the RPM calibration.

!In some vehicles, the tachometer may not work properly even if you performed the RPM calibration.

1Park your vehicle in a safe place and be sure to apply the parking brake.

2Use MULTI-CONTROL to select Calibration.

Calibration appears in the display.

3Keep RPMs of the engine at 4 000 rpm and press MULTI-CONTROL.

To measure the RPM of your vehicle properly, keep RPMs of the engine at 4 000 rpm for a few seconds.

When the RPM calibration is completed,

Completed is displayed.

# Some vehicles have a rev limiter that kicks in early (e.g., 3 000 rpm) while parking. In this case,

perform RPM measurement at 2 000 rpm.

# To switch between 4000 rpm and 2000 rpm, push MULTI-CONTROL left or right.

Activating the BT Audio source

You need to activate the BT Audio source in order to use a Bluetooth audio player.

1Use MULTI-CONTROL to select

BT AUDIO.

BT AUDIO appears in the display.

En 87

<CRB2179-A/N>87

Image 87

Pioneer DEH-P9850BT Initial Settings Switching the reverse mode, Switching the Ever Scroll, Calibrating the RPMs

Contents

DEH-P9850BT Thank you for buying this Pioneer product Contents Reading jacket arts Multi-CD Player Playing a CD Adjusting source levels Operating environment FeaturesBefore You Start About this unit About this manual About AAC About BluetoothBefore You Start About WMA Resetting the microprocessor Clearing all memoryProtecting your unit from theft Attaching the front panel About the demo modeReverse mode Removing the front panel Using the remote control Use and care of the remote controlFeature demo mode Installing the battery Audio button operation Remote control What’s WhatHead unit Ak e j Basic Operations Turning the unit on Selecting a sourceLoading a disc Adjusting the volume Basic OperationsTurning the unit off Tuner Listening to the radio Storing the strongest broadcast frequencies Tuner Introduction of advanced tuner operationStoring and recalling Broadcast frequencies Selecting stations from the preset channel list Tuning in strong signalsTuner Selecting a track directly Built-in CD Player Playing a CD Playing tracks in random order Repeating play Searching every 10 tracks in the current disc Pausing CD playbackBuilt-in CD Player Scanning tracks of a CD Selecting the search method Using disc title functions Built-in CD PlayerEntering disc titles Selecting tracks from the track title list Using CD Text functionsDisplaying disc titles Displaying text information on CD Text discs 06 MP3/WMA/AAC/WAV Player Playing MP3/WMA/AAC WAV files Selecting a track directly in the current folder MP3/WMA/AAC/WAV Player CRB2179-A/N26 Searching every 10 tracks in the current folder Pausing MP3/WMA/AACScanning folders and tracks WAV playback Displaying text information on MP3/WMA/AAC/WAV disc When playing back a WAV discWhen playing back an MP3/ WMA/AAC disc 06 MP3/WMA/AAC/WAV Player Reading jacket arts Selecting tracks from the file name listDisplaying jacket arts on CD-ROM discs Selecting folders with jacket arts 12 3 About the telephone source Bluetooth TelephoneSetting up for hands-free phoning Standby mode Making a phone call Bluetooth Telephone Basic operation of hands- free phoning Answering an incoming call Taking a phone call Connecting a cellular phone Searching for available cellular phones Using a cellular phone to initiate a connection Disconnecting a cellular phone Registering connected cellular phoneDeleting a registered phone Connecting to a registered cellular phone Connecting to a registered phone manuallyConnecting to a registered phone automatically Transferring entries to the Phone Book Using the Phone Book Changing the Phone Book display order Calling a number in the Phone BookAssign genres to phone numbers Editing the name of a Phone Book entry Selecting the icon of a Phone Book entry Editing phone numbers Using preset numbers Clearing memoryClearing a Phone Book entry Displaying the Call History Using the Call History Assigning preset numbers Making a call by entering phone numberCalling a number from the Call History Changing the ring tone Echo canceling and noise reduction Selecting the icon for user Bluetooth Telephone Setting the automatic rejectingSetting the automatic answering Displaying BD Bluetooth Device address Displaying system version for repair Displaying BD address of your cellular phoneDisplaying BD address of this unit Setting up for Bluetooth audio player Connecting a Bluetooth audio player Bluetooth Audio Stopping playback Bluetooth Audio Function operationPlaying songs on Bluetooth audio player Pausing a song Displaying BD address of this unit Disconnecting a Bluetooth audio player Multi-CD Player Playing a CD Multi-CD Player Disc multi-CD playerIntroduction of advanced multi-CD player operation Scanning CDs and tracks Using ITS playlists Creating a playlist with ITS programmingPlayback from your ITS playlist Erasing a CD from your ITS playlist Erasing a track from your ITS playlist Selecting discs from the disc title list Black plate 59,1 Browsing for a song Playing songs on iPod Listening to songs on your iPod Selecting a playlist Playing songs on iPodDisplaying text information on iPod Searching for a song Playing songs in a random order shuffle Playing songs on iPod Pausing a song MULTI-CONTROL left or right TV tuner Watching the television TV tuner Introduction of advanced TV tuner operation Storing and recalling broadcast stationsStoring the strongest broadcast stations sequentially TV tuner DVD Player Playing a disc Selecting a discSelecting a folder DVD Player Introduction of advanced DVD player operation Pausing disc playback Using ITS playlist and disc title functionsDVD Player CRB2179-A/N70 Extra functions Audio Adjustments Adjusting the audio easilyAdjusting the audio finely Adjustments Audio Adjustments Using the position selectorUsing balance adjustment Adjusting the time alignment Using the time alignment Using subwoofer output Adjusting subwoofer settingsAdjusting low pass filter attenuation slope Using the high pass filter Setting the high pass filter for front speakersMuting the speaker units filters Recalling equalizer curves Using the auto-equalizerUsing the equalizer Setting the high pass filter for rear speakers Adjusting 16-band graphic equalizer Adjusting equalizer curves Using compression and BMX Using BBE sound Adjusting loudness Adjusting source levelsUsing auditory user interface Before operating the auto TA and EQ function Carrying out auto TA and EQ CRB2179-A/N82 Initial Settings Adjusting initial settings Setting the dateSelecting the display language Setting the AM tuning step Initial SettingsSetting the clock Setting the FM tuning step Switching the dimmer setting Switching the warning toneSwitching the face auto open Switching the auxiliary setting Switching the sound muting/attenuation Switching the feature demoCorrecting distorted sound Activating the BT Audio source Initial Settings Switching the reverse modeSwitching the Ever Scroll Calibrating the RPMs Resetting the Bluetooth wireless technology module Entering PIN code for Bluetooth wireless connection About AUX1 and AUX2 Using the AUX sourceSetting the AUX title Other Functions Turning the clock display on or off Using different entertainment displays Setting the entertainment displayOther Functions Entertainment Setting the background display On rewriting the entertainment displays on CRB2179-A/N92 Message Cause Action Understanding auto TA EQ error messages CD-R/CD-RW discs CD player and care Additional Information Dual DiscsMP3, WMA, AAC and WAV files MP3 additional information WMA additional informationAAC additional information WAV additional information About folders and MP3/ WMA/AAC/WAV files CRB2179-A/N98 A2DP Additional Information Terms 100 En General Additional Information Specifications 102 En CRB2179-A/N103 Pioneer Corporation