Pioneer DEH-P9850BT Audio Adjustments, Using the position selector, Using balance adjustment

Black plate (72,1)

Section

13 Audio Adjustments

Fader (balance adjustment)—Position (posi- tion selector)—TA Mode (time alignment set- ting)—Time Alignment (time alignment adjusting)—Loudness (loudness)—Powerful (graphic equalizer adjustment)—FREQ. (16- band graphic equalizer adjustment)— Subwoofer1 (subwoofer on/off)— Subwoofer2 (subwoofer cut-off frequency)— Subwoofer3 (subwoofer slope)—Front HPF (front high pass filter slope)—

Front HPF FREQ. (front high pass filter cut-off frequency)—Rear HPF (rear high pass filter slope)—Rear HPF FREQ. (rear high pass filter cut-off frequency)—BBE (BBE)—COMP/BMX (Compression and BMX)—Auto EQ (auto- equalizer on/off)—SLA (source level adjust- ment)—AUI sound level (auditory user inter- face)

#When selecting OFF in TA Mode, you cannot switch to Time Alignment.

#You can select Subwoofer2 and Subwoofer3 only when subwoofer output is turned on in Subwoofer1.

#When tuner, television or AUX is selected as a source, you cannot select COMP/BMX.

#When selecting the FM tuner as the source, you cannot switch to SLA.

#To return to the display of each source, press BAND.

Note

If you do not operate the audio function within about 30 seconds, the display is automatically re- turned to the source display.

Using the position selector

One way to assure a more natural sound is to clearly position the stereo image, putting you right in the center of the sound field. The posi- tion selector function lets you automatically adjust the speakers’ output levels and inserts a delay time to match the number and posi- tion of occupied seats.

1Use MULTI-CONTROL to select Position. Position appears in the display.

2Push MULTI-CONTROL left, right, up or down to select a listening position.

Direction	Display	Position
Left	Front Left	Front seat left
Right	Front Right	Front seat right
Up	Front	Front seats
Down	All	All seats

#To cancel the selected listening position, push MULTI-CONTROL in the same direction again.

Using balance adjustment

You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.

1Use MULTI-CONTROL to select Fader.

Fader appears in the display.

# If the balance setting has been previously ad- justed, Balance will be displayed.

2Push MULTI-CONTROL up or down to adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance moves towards the front or rear.

72 En

<CRB2179-A/N>72