Pioneer DEH-P9850BT Adjusting equalizer curves, Adjusting 16-band graphic equalizer

Audio Adjustments

Display	Equalizer curve
Powerful	Powerful
Natural	Natural
Vocal	Vocal
Flat	Flat
Custom1	Custom 1
Custom2	Custom 2
Super Bass	Super bass

!Custom1 and Custom2 are adjusted equal- izer curves that you create. Adjustments can be made with a 16-band graphic equal- izer.

!When Flat is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers: Powerful—Natural—Vocal—Flat—Custom1

—Custom2—Super Bass

Adjusting equalizer curves

The factory supplied equalizer curves, with the exception of Flat, can be adjusted to a fine de- gree (nuance control).

1Use MULTI-CONTROL to select the gra- phic equalizer adjustment.

Powerful appears in the display.

# If the equalizer curve has been previously se- lected, the curve of that previously selected will be displayed instead of Powerful.

Black plate (77,1)

Section

13

2 Push MULTI-CONTROL left or right to	English
select an equalizer curve.
Each time MULTI-CONTROL is pushed left or
right, equalizer curves are selected in the fol-
lowing order:
Powerful—Natural—Vocal—Flat—Custom1
—Custom2—Super Bass
3 Push MULTI-CONTROL up or down to
adjust the equalizer curve.
Each time MULTI-CONTROL is pushed up or
down, the equalizer curve increases or de-
creases respectively.
+6 to –6 is displayed as the equalizer curve is
increased or decreased.
# The actual range of the adjustments are differ-
ent depending on which equalizer curve is se-
lected.
# The equalizer curve with all frequencies set to
0 cannot be adjusted.

Adjusting 16-band graphic equalizer

For Custom1 and Custom2 equalizer curves, you can adjust the level of each band.

!A separate Custom1 curve can be created for each source. (The built-in CD player and the multi-CD player are set to the same equalizer adjustment setting automati- cally.) If you make adjustments when a curve other than Custom2 is selected, the equalizer curve settings will be memorized in Custom1.

!A Custom2 curve can be created common to all sources. If you make adjustments when the Custom2 curve is selected, the Custom2 curve will be updated.

1Recall the equalizer curve you want to adjust.

See Recalling equalizer curves on the previous page.

En 77

<CRB2179-A/N>77