Black plate (9,1)

Before You Start

!A few seconds after turning the ignition switch to on or off, the front panel automati- cally moves. When this happens, your fingers may become jammed in the panel, so keep your hands away from it.

Removing the front panel

1Press and hold EJECT to open the front panel.

2Replace the front panel by clipping it into place.

Section

01

English

2Slide and remove the front panel to- ward you.

Take care not to grip it too tightly or to drop the front panel and protect it from contact with water or other fluids to prevent perma- nent damage.

About the demo mode

This unit features two demonstration modes. One is the reverse mode, the other is the fea- ture demo mode.

Important

The red lead (ACC) of this unit should be con- nected to a terminal coupled with ignition switch on/off operations. If this is not done, the vehicle battery may be drained.

3Put the front panel into provided pro- tective case for safe keeping.

Attaching the front panel

1 Make sure the inner cover is closed.

Reverse mode

If you do not perform an operation within about 30 seconds, screen indications start to reverse, and then continue reversing every 10 seconds. Pressing BAND when power to this unit is turned off while the ignition switch is set to ACC or ON cancels the reverse mode. Press BAND again to start the reverse mode.

En

9

<CRB2179-A/N>9

Page 9
Image 9
Pioneer DEH-P9850BT operation manual About the demo mode, Removing the front panel, Attaching the front panel, Reverse mode