2 During playback, press the top of the jog dial.

Playback stops.

3While pressing the top of jog dial, spin the jog dial in the desired direction and at the desired speed.

The sound is played according to the spinning direction and speed of the jog dial.

4 Release your hand from the top of the jog dial.

Normal playback resumes.

Returning to the temporary cue point (Back cue)

During playback, press the [CUE] button.

The playback position immediately returns to the currently set temporary cue point and pauses.

!When the [PLAY/PAUSE f] button is pressed, playback starts from the temporary cue point.

English

Pitch bend

During playback, spin the outer section of the jog dial.

The playing speed increases when spun clockwise, decreases when spun counterclockwise. When spinning is stopped, playback returns to the normal speed.

!When the jog mode is set to the normal mode, the same operation is possible by spinning the top of the jog dial.

Switching the jog dial illumination

The way the jog dial illumination lights can be selected from one of two types.

!The same setting is applied to the jog dials for both decks (A) and

(B).

Press the [VINYL (ILLUMINATION)] button while pressing the [SHIFT] button.

The setting switches each time the button is pressed.

Specifying the position to be played instantly (NEEDLE SEARCH)

The sound at the position at which the

[NEEDLE SEARCH (ALPHABET SEARCH)] pad is touched can easily be played.

The left edge of the [NEEDLE SEARCH (ALPHABET SEARCH)] pad indicates the beginning of the track, the right edge the end of the track.

1Touch the [NEEDLE SEARCH (ALPHABET SEARCH)] pad.

The track’s playing position changes instantly according to the position on the pad that is touched.

2 While touching the

[NEEDLE SEARCH (ALPHABET SEARCH)] pad, slide your finger along the pad.

The track’s playing position moves as you slide your finger.

Setting a temporary cue point

1 During playback, press the [PLAY/PAUSE f] button.

Playback is paused.

!Adjust the position by spinnig the jog dial during pause, if desired. (To move the playback position during pause, other methods also can be used.)

2 Press the [CUE] button.

A temporary cue point is set at the position at which the track was paused.

!When a new temporary cue point is set, the point previously set is canceled.

Checking the temporary cue point (Cue sampler)

Keep pressing the [CUE] button after returning to the temporary cue point.

Playback starts from the temporary cue point. Playback continues while the [CUE] button is pressed.

!When the [PLAY/PAUSE f] button is pressed during cue sam- pling, playback continues from that point.

Loop operations

Setting Loop

1During playback, press the [LOOP IN (GRID SET)] button at the point at which you want loop playback to start (the loop in point).

Loop In Point is set.

2Press the [LOOP OUT (GRID TAP)] button at the point at which you want loop playback to end (the loop out point).

The Loop Out Point is set, and Loop playback starts from the Loop In Point.

Fine-adjusting the loop in point (loop in adjust)

1During loop playback, press the [LOOP IN (GRID SET)] button.

2Spin the jog dial.

The loop in point can be fine-adjusted.

!The loop in point’s adjustable range is any point before the loop out point.

3 Press the [LOOP IN (GRID SET)] button.

Normal loop playback resumes.

Fine-adjusting the loop out point (loop out adjust)

1During loop playback, press the [LOOP OUT (GRID TAP)] button.

2Spin the jog dial.

The loop out point can be fine-adjusted.

!The loop out point’s adjustable range is any point before the loop in point.

3 Press the [LOOP OUT (GRID TAP)] button.

Normal loop playback resumes.

En 23