!When the product exhibits a distinct change in performance – this indicates a need for service.

Check that there are no irregularities with the AC adapter or power plug, then insert the power plug into the specified position of the AC adapter using the specified procedure until a click is heard. For details, see Mounting the power plug on page 5.

If there are irregularities with the AC adapter or power plug, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

!Do not use this unit with a coin, paper clip or other metal object stuck between the AC adapter and power plug. Doing so could cause a short circuit, leading to fire or electric shock.

!When mounting the AC adapter on a wall outlet, make sure there is no space between the AC adapter and the wall outlet. Faulty contact or a coin, paper clip or other metal object getting stuck in the space could cause a short circuit, leading to fire or electric shock.

Coin, paper clip or other metal object

Side

Top

!The power plug could come detached from the AC adapter and remain in the power outlet if someone trips on the AC adapter’s power cord or if something hits the AC adapter. If this happens, remove the power plug remaining in the outlet with dry hands, hold- ing it as shown on the diagram below and without touching metal parts. Do not use any tools to remove it.

Do not touch metal parts.

Mounting the power plug

Slide the power plug along the guide rails in the AC adapter unit as shown on the diagram below, then press in until a click is heard.

PUSH

PUSH

 

 Removing the power plug

English

unit, slide the power plug away from the adapter as

While pressing the [PUSH] button on the AC adapter

 

shown on the diagram below to remove it.

 

Once the power plug is mounted, there is no need to remove it.

PUSH

PUSH

Power plug

This product comes with the types of power plugs shown below. Use the appropriate power plug for the country or region you are in.

Type 1 (for Europe)

Type 2 (for the UK)

Installing the software

Before installing the software

About the software to be installed

The software to be installed differs according to the computer you are using.

For Windows

After the ITCH software is installed, the driver software is also installed.

!Carefully read the user license agreements below.

—SERATO — USER LICENSE AGREEMENT (“License Agreement”) (Refer to About the ITCH software.)

—Software end user license agreement (Refer to About the driver software (Windows).)

!To install or uninstall the driver software, you need to be authorized by the administrator of your computer. Log on as the administrator of your computer before proceeding with the installation.

!If you connect this unit to your computer without installing the driver software first, an error may occur on your computer depending on the system environment.

!If installation of the driver software is interrupted after it has started, start the installation procedure over again from the beginning.

For Mac OS X

Only the ITCH software is installed.

!Carefully read the user license agreements below.

—SERATO — USER LICENSE AGREEMENT (“License Agreement”) (Refer to About the ITCH software.)

En 5