Pioneer VSX-D3S Sound Edit Operation Gui Operation, +10dB, +6dB, Setting The Speaker Mode, Small

SOUND EDIT OPERATION (GUI OPERATION)

÷If you press the SOUND EDIT button on a function operation display, display switches to “SOUND EDIT” indications for the currently selected surround mode. (Press the EXIT button to return to the original function operation display.)

÷On the SOUND EDIT display, you can adjust levels and balances set to the speaker mode, etc.

(When using PRO-LOGIC THEATER)

SOUND EDIT
PRO - LOGIC THEATER						TONE
						TEST
SPEAKER			MASTER BALANCE			F - L
MODE
	L		REAR BALANCE			R
	L					R
					+10dB
	CENTER LEVEL –					+
		REAR LEVEL		–	–10dB	+
SUB WF LEVEL				–	+6dB	+
E F F E C T LEVEL				–	50	+

EXIT

SETTING THE SPEAKER MODE

You can set this unit to match the requirements and specifications of your stereo system’s speakers (whether or not center speaker(s), rear speakers or a sub-woofer are used, speaker size, etc.) to assure optimum sound quality.

÷Pressing the SPEAKER MODE button on the “SOUND EDIT” display takes you to the “SPEAKER MODE” display.

SPEAKER MODE

	FRONT				CENTER
	SPEAKER				SPEAKER
	LARGE				SMALL
	REAR				SUB
	SPEAKER	⋅ 2			WOOFER
SMALL					USE
		LFE MODE		+10dB
	LOW CUT FIL.			ON
	CROSS OVER		–	100Hz +
	CENTER DELAY		S		L	L
	REAR DELAY		S				EXIT

÷Set the SPEAKER MODE using the different buttons.

During Pro-Logic reproduction, this unit does not let you switch between NORMAL, WIDE, and PHANTOM center mode settings. However, setting the SPEAKER MODE as follows provides the same effects as these modes.

Front	Center
LARGE	SMALL	\	NORMAL
LARGE	LARGE	\	WIDE
LARGE	NONE	\	PHANTOM

Set the rear speaker to NONE for conventional 3CH Logic reproduction.

SUB	Selects whether there is a sub-woofer or not.
WOOFER	USE Ô NONE

LFE MODE

÷Attenuate LFE (Low Frequency Effect = ultra-low bass effect for more powerful movie sound or music) level. It changes in

sequence each time the	button is pressed.
3 +10 dB	3 0 dB	3 OFF

NOTE:

If you set to “+10 dB”, front three channel (L + R + C) output power is required for the sub-woofer. If this is more power than the sub-woofer can handle, clipping may occur resulting in distortion.

LOW CUT FIL.

÷Switch ON if the sub-woofer does not have high power handling capabilities. (This enables bass boosting while reducing the possibility of the sub-woofer clipping.)

ON Ô OFF

CROSSOVER – +

÷Set sub-woofer crossover frequency (highest frequency it can reproduce). Press – to lower the crossover frequency and press + to raise it. (100 Hz/150 Hz/200 Hz)

CENTER DELAY S L

÷Sets center channel delay time. Press S for shorter delay, press L for longer delay.

÷This is possible only when the AC-3 is selected.

REAR DELAY S L

FRONT

SPEAKER

CENTER

SPEAKER

REAR

SPEAKER

Selects the size of the front L, R speakers.

LARGE Ô SMALL

Selects center speaker size, or NONE if no center speaker is used.

3 LARGE 3 SMALL 3 NONE

Selects the size and number (1 or 2) of rear speakers, or NONE if no rear speakers are used.

3 LARGE x 2 3 SMALL x 2 3 LARGE

NONE 2 SMALL 2

÷Set rear (surround) channel delay time. Press S for shorter delay, press L for longer delay.

÷This is possible only when the AC-3 or PRO-LOGIC is selected.

Pressing EXIT returns you to SOUND EDIT display.

29

<ARB7050>