REMOTE CONTROL OPERATION
TAPE operation
1POWER button:
Switches cassette deck power ON/OFF.
21 (FF) button:
Rapidly advances the tape in the direction of the arrow.
37 (STOP) button:
Stops the tape transport.
48 (PAUSE) button:
Temporarily stops tape transport. Press again to resume
tape transport.
5¡ (FF) button:
Rapidly advances the tape in the direction of the arrow.
63 (PLAY) button: Selects playback.
NOTE:
On a Pioneer double deck, you can operate Deck II.
Tuner operation
2ST – (Station Down) button:
Used for recalling memorized stations.
3FQ – (Frequency Down) button: Shifts the frequency down.
4FQ + (Frequency Up) button:
Shifts the frequency up.
5ST + (Station Up) button:
Used for recalling memorized stations.
6Band button:
Switches the FM and AM bands in turn.
Auto tuning:
Press FQ + (up) or – (down) button until the frequency starts to change, then release it. The tuner will automatically search for a broadcasting station and stops when one is found, and the TUNED indicator lights up. To search for another station, press again.
Manual tuning:
Press FQ + (up) or – (down) button and release quickly. The tuning frequency will change by one step each time the button is pressed. Press as many times as necessary to tune in the desired station. The TUNED indicator lights up when the station is tuned in best.
÷If you keep the FQ (up/down) button depressed after the frequency has began to change, the reception frequency changes continuously, and stops when the button is released.
NOTE:
When AUTO TUNING is in use, reception may not be possible over long distances or when signals are weak. At these times MANUAL TUNING is recommended.
23
<ARB7050>
