Pitco Solstice and Solstice Supreme High Efficiency Gas Fryers
Replacing the Burner Assembly
Replacing the Burner(s)
1.Drop the gas valve out of the way by holding the elbow with a wrench and removing the swivel nut on the top gas valve fitting using a
15/16 inch
3.Remove the drain valve handle by sliding handle off the stem.
2.Remove the nut, which holds the drain valve handle, using an 11/16 inch socket.
4.Remove the pilot assembly. See “Replacing an Igniter/Pilot Assembly” on page 28.
5.Remove the two (2) screws, which hold the rollout switch, using a 5/16 inch socket.
NOTE: Hold the drain valve handle when removing the nut to ensure that the oil does not drain out.
SG/SSH Series Service Manual | 36 |
