DM500™ and DM550™ Series Digital Mailing System Operating Guide

Do not use the telephone or equipment connected to the telephone line in the vicinity of a gas leak.

Do not connect your postage meter (Postal Security Device) to a digital phone line. The device’s built-in modem is designed to work with an analog phone line only. (Your fax machine is usually connected to an analog phone line.) If you do not know if your line is digital, call your phone provider for verification.

Disconnect the telephone cord from the wall before removing the IntelliLink® Control Center.

CAUTION: To reduce the risk of fire, use only the 26 AWG telecommunication line cord either supplied with the machine or supplied separately.

Important Information About Powering Your

DM Series™ Digital Mailing System Off

Your DM Series™ Digital Mailing System is designed to remain powered on at all times. This is necessary so that the printer station can perform the required maintenance it needs to maintain peak performance.

Your DM Series™ System has a power switch (for the location, refer to Chapter 2, page 2-6) so that you can properly remove power to the system.

If you need to power off your system, you must use the power switch. When you power off the system, the system immediately moves the print- head back to the capping station to keep the printhead from drying out.

Powering off your system by any other means, such as a wall switch, a power strip, or unplugging from a wall outlet, will result in higher than nor- mal ink consumption and could damage your mailing system.

ON

OFF

NO NO

YES

SV61436 Rev. D

1- 5

Page 15
Image 15
Pitney Bowes DM500, DM550 manual Off