Pitney Bowes DM550 Scale/Rates Smart Classes, Creating a Smart Class with an Auto Inscription

5 • Mailing System Setup

Scale/Rates:

Confirm Svc Barcode Prompt

Scale/Rates: Smart Classes

This feature may be offered as a standard or optional feature and is not available on all Pitney Bowes solutions. Please contact your local account representative to determine if this option is accessible on your system.

When using USPS Confirmation Services, you can turn this option on to have the system display the following prompt when it is time to apply a bar- code: “Apply barcode label to package”

1.Press the Menu key on the control center and select Set Up. Press the down arrow key and select Scale/Rates.

2.Select Confirm Svc Barcode Prompt to toggle between on and off.

3.Press Clear or the left arrow to exit.

The Smart Class™ capability of the DM Series™ mailing system software has been enhanced to provide fully automatic printing of postal inscriptions or postal endorsements. With the Smart Class™ feature, you are able to set the WOW® (Weigh-On-The-Way®) in an automatic mode to allow changes in Class based on the weight of the mail-piece. (Example: Auto- matically switch between Presort Classes depending on the weight of mail- pieces.) Now, the system can also automatically switch between Postal Inscriptions (i.e. PRESORT) or Postal Endorsement (i.e. MEDIA MAIL, ADDRESS SERVICE REQUESTED) that you choose for each weight break.

Two steps are required to use this feature. First, you must select an adver- tisement and/or inscription while setting up the Smart Class™ template. Second, you must turn “on” the printing capability of printing Auto Inscrip- tions. See Setting Up a Smart Class™ with an Auto Inscription in this sec- tion for more information.

Creating a Smart Class™ with an Auto Inscription

The following example shows how to set 3 different weight breaks. The weight breaks will use the following three classes.

For weight break:	Use Class:
0.0 oz to 3.0 oz	1st Class Automation Letter 5 Digit
3.0 oz to 13.0 oz	1st Class Non-Automation Presort
13.0 oz to 1.0 lb	Priority

1.Press the Menu key.

2.Select Set Up, then press the down arrow and select Scales/Rates.

3.Press the down arrow (depending on your system you may have to press it twice) and select Smart Classes.

4.Select Create.

5.Select the appropriate Carrier, in this example, USPS Domestic.

a.You are prompted to enter the maximum weight for this weight break:

Enter the max weight for this weight break

0 lb

0.0 oz

to

__lb

__oz

5-12 SV61436 Rev. D