Planar 40 manual Adjusting the Screen, LCD Monitor Instructions

LCD Monitor Instructions

Adjusting the Screen

This LCD monitor decodes the signal from a computer automatically, and displays the image on a screen in accordance with the preset mode. Unless a display mode has been in preset table, the image is displayed under the similar mode in preset table. In this case, the adjustment for this LCD monitor must be done in accordance with a computer connected with. Please follow the OSD (On Screen Display) menu to adjust screen settings.

Name / Function of Buttons for Adjustment

[MENU] Button			To display the OSD menu and step back to the screen
			selected before
[ENTER] Button			To select the item you wish to adjust
[	] [	] Button	To move the cursor between the items adjusted and
			change the adjustment data

Adjustment Items for computer screen

Picture Menu (refer to page 17-21)

BRIGHTNESS ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Adjust the brightness for the screen CONTRAST ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Adjust the contrast for the screen

HPOSITION ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Adjust the horizontal position for the screen V POSITION ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Adjust the vertical position for the screen PHASE ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Adjust the phase for the screen FREQUENCY ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Adjust the horizontal width for the screen SCALING ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Scale the screen

Note

H position, v position, phase and frequency for the screen can be adjusted in Analog mode only.

Advanced Menu (refer to page 21-23)

COLOR ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Adjust the color temperature for the screen USER RED ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Adjust the level of red for the screen USER GREEN ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Adjust the level of green for the screen USER BLUE ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥ ‥Adjust the level of blue for the screen

11