Planar 40 Monitor Specifications

57

Specifications

Monitor Specifications

Liquid Crystal Panel TFT

Display Size 39.6''

Pixel Configuration 1,280 x 768

Pixel Pitch 0.6735 x 0.6735 mm

Brightness

420 cd/m2

typ.

Response Time 22 ms

Contrast 600 : 1 typ.

Angle of Visibility Up 85, Down 85, Right 85, Left 85 degrees

(contrast ratio of less than 10)

Note : To improve this LCD monitor’s performance level, its specifications andappearance are subject to change without notice.

LCD

PC Input

Vertical signal 56 - 75 Hz

Horizontal signal 31.4 - 60.2 kHz

Video Signal Analog: RGB 75 0.7Vp-p Digital: DVI Standard Version 1.0

No. of Colors 16.77 million

OSD Language English, German, Japanese, French, Spanish

Plug & Play VESA DDC2B

Power Management VESA DPMS

Video Input

Composite Video Signal 75 , 1Vp-p (NTSC, PAL, SECAM)

Connector BNC x 1

S-Video Signal Luminance : 75 1Vp-p

Chrominance : 75 0.286Vp-p (NTSC, PAL SECAM)

Connector Mini DIN 4pin X1

Component Video Signal Y/Cb/Cr, Analog RGB+C SYNC, Analog RGB+HD/VD

Connector BNC x 5

Dimensions 941 (W) x 601 (H) x 120 (D) mmWeight 28.6 kgOperating Conditions Temperature: Operating: 5°C to 35°C Storage: -20°C to +60°CHumidity: 30% to 85% RH (no condensation)

Power Supply Input: AC 120V(North America) AC 220-240V(Europe)

Output: Available to cascadePower Consumption 260 W (28 W in Energy Saving mode)

Physical

Contents

Main Table of contents Precautions Before First Use Names and Functions Front View NOTE Check Accessories Check that the main unit and all accessories are present. Rear View AC-OUT Before First Use Outer Dimension When you install the LCD Monitor, please take care the following: Page Page Page Before First Use Installation NOTE How to secure the monitor on a wall Caution Note: UP b LCD Monitor Instructions Adjusting the Screen Picture Menu Adjustment Items for computer screen Advanced Menu Adjustment Items Pip(picture in picture) Menu Adv pip (Advanced picture in picture) Menu Options Menu Utilities Menu Adjustment Items Picture Menu Advanced Menu Adjustment Items for Composite Video, S-Video and Component Video screen Options Menu Mode 14 Change or indicate the input signal 1. to change or indicate the current mode. 2. 1 Display the OSD (On Screen Display) Menu Before Adjustment Adjustment or Setting NOTE Select the item to be adjusted on the Main Menu Select the item to be adjusted on the Sub Menu 17 Adjustment Procedure (Picture Menu) 1 Manual Adjustment 2. The selected item of [brightness] turns blue. Adjust the contrast 3 2. The selected item of [H position] turns blue. 19 3. 4 Adjust the phase (Analog mode only) 5 3. 1. 6 3. 2. The selected item of [frequency] turns blue. Adjust the scaling 1 2. The selected item of [color] turns blue. B. Advanced Menu 3. 2 1. 2. 3. button. 1 2. 24 (Pip Menu) 3. 2 2. The selected item of [pos] turns blue. 3. 25 Adjustment Procedure (Pip Menu) Change the input signal 3. 2. Adjust the brightness (Video signal only) 26 Adjustment for computer screen *Continued to next page. The selected item of [contrast] turns blue. 2. Adjustment Procedure (Pip Menu) The selected item of [color] turns blue. Adjust the color (Video signal only) By pressing the [ ] button, the screen deepens. By pressing the [ ] button, the screen lightens. 2. 28 The selected item of [sharpness] turns blue. Adjust the sharpness (Video signal only) 2. The selected item of [tint] turns blue. 1 1. 2. Adjust the vertical position 2 30 Select the video format 1. 2. button. E. Options Menu Select the osd position 2. The selected item of [osd] turns blue. 3. 32 3. 2. The selected item of [language] turns blue. Automatic Adjustment (Analog mode only) 5 Display the resolution 4 below [Auto Adjust] on the Sub menu. Each time changing the resolution, its information is displayed. F. Utilities Menu Change the osd timeout 1. 3. Change the osd background Adjustment Procedure (Utilities Menu) 3. 2. The selected item of [reset] turns blue. 3. A. Picture Menu (Picture Menu) Main menu Adjust the brightness 2. 3 38 Adjust the vertical position *Continued to next page. 4 2. The selected item of [V position] turns blue. Adjust the color 5 6 3. 2. The selected item of [tint] turns blue. 40 7 2. The selected item of [sharpness] turns blue. 3. selected value outline of the picture 1 2 3 4 5 6 7 8 8 2. 3. 42 Adjustment for Composite Video / S-Video / Component Video screen 1 (Advanced Menu) 2. B. Advanced Menu 43 2 C. Video Menu Adjustment for Composite Video / S-Video / Component Video screen (Video Menu) Select the video format 3. 1 46 2. Display the osd version 3. 47 E. Utilities Menu Change the osd timeout 1. 2. button. 48 3. (Ex.) Sub menu Delete the data saved at the current display mode 1. 1 to display the Shortcut Menu. Press the [ENTER] button. 2. Adjust the brightness 2 4 2. Adjust the contrast 3 2. Additional Functions Plug and Play Power Management System Maintenance Cabinet Display Screen Troubleshooting Fault Finding Fault Finding Computer Screen is displayed: Video Screen is displayed: Screen Display Specifications Table of Preset Data Cable Pin Arrangement Cable Pin Arrangement (female) Cable Pin Arrangement (female) Cable Pin Arrangement (male) Digital Video Input : DVI-D (24pin) Monitor Specifications Physical LCD PC Input Video Input Federal Communications Commission (FCC) Statement Planar Systems, Inc. 2RS6P10A00300A