22
EN USING YOUR HEADSET

ANSWERING AND ENDING CALLS

1. To answer a call, briey press the call control button or the
volume/mute button.
2. To answer or end a call, press the call control button.

ADJUSTING THE VOLUME

To increase the listening volume of the headset, press the upper end
(+) of the volume/mute button.
To decrease the listening volume, press the lower end (-).
WARNING: Do not use headphones/headsets at high volumes for
an extended period of time. Doing so can cause hearing loss.
Always listen at moderate levels.

LAST NUMBER REDIAL

To activate last number redial, double click the call control button.
You will hear a high tone for each key press.
NOTE: Last number redial must be supported by your device
or mobile phone provider.

USING THE MUTE

To turn the mute on whilst on a call, press both sides of the volume/
mute button simultaneously until you hear a beep.
To turn the mute off, press both buttons again.

MOVING OUT OF RANGE

As the headset is moved away from the mobile phone or Bluetooth
device, the following could occur:
• Audio quality will degrade.
• A beep will be heard in the headset.
• Only the power o function will operate.
After 30 seconds, the headset will make one attempt to reconnect
to the phone or device.