9.Press /LIGHT repeatedly to adjust the desired minutes. You have gone through the alarm setting function.

The minutes are flashing.

10.Press MODE and move onward to set the time.

When the alarm sounds, it will remain on for one minute unless you turn it off earlier by pressing any of the three buttons of the wrist receiver.

S E T T I N G T H E T I M E O F D A Y

AM/PM (In 24h mode the hours) is flashing.

1.Press /LIGHT to select AM or PM.

2.Press SET/START/STOP to lock your selection. The hours start to flash.

3.Press /LIGHT repeatedly to adjust the desired hour.

4.Press SET/START/STOP to lock your selection.

The tens of minutes start flashing.

5.Press /LIGHT repeatedly to adjust the desired tens of minutes.

6.Press SET/START/STOP to lock your selection.

The seconds go to zero.

The minutes start flashing.

7.Press /LIGHT repeatedly to adjust the desired minutes.

8.Press SET/START/STOP to lock your selection.

You have gone through the time setting function. The seconds start running.

AM/PM or the hours start flashing.

9.Press MODE and move onward to set the date.

13

Page 13
Image 13
Polar M71ti user manual T T I N G T H E T I M E O F D a Y, Minutes are flashing, Seconds go to zero Minutes start flashing