Cadence* on/off (Cadence)
If you start from Time of Day display, repeat steps 1-5.
6.Scroll up or down until Cadence is displayed.
7.Press OK to start setting the Cadence. On/OFF starts to flash.
8.Scroll up or down to set the Cadence on or off. Press OK.
Autostart on/off (AutoStrt)
If you start from Time of Day display, repeat steps 1-5.
6.Scroll up or down until AutoStrt is displayed.
7.Press OK to start setting the Autostart. On/OFF starts to flash.
8.Scroll up or down to set the Autostart on or off. Press OK.
Autostart means that the receiver automatically starts or stops the exercise recording, as you start or stop moving your bicycle.
To continue your settings, press the stop button. To return to the Time of Day display, press and hold the stop button.
*Optional Polar Cadence Sensor required
Naming Bike 1 and Bike 2
You can name the bikes, with four letters, numbers or marks.
The number in the right corner of the display indicates, which bike settings are in use. (b0=Bike off, b1= Bike 1, b2=Bike 2)
1.In the Time of Day display scroll up or down until OPTIONS is displayed.
2.Press OK to enter the Options mode. EXERCISE SET is displayed.
3.Scroll up or down until BIKE SET is displayed.
4.Press OK to start the bike settings.
5.Scroll up or down until Bike 1 or 2 is displayed.
6.Press and hold signal/light button. Adjustable letter is flashing.
7.Scroll up or down to select the desired mark. Press OK.
8.Repeat previous step until you have chosen all four letters.
B 36 | B 37 |
