Polar S520, S510 manual Display Symbols, Display Texts

Models: S510 S520

1 60
Download 60 pages 59.98 Kb
Page 54
Image 54

Display Symbols

Indicates an ongoing heart rate measurement and flashes to the beat of your heart.

Indicates there has not been heart rate reception for at least 5 seconds.

The graphic bar consists of five blocks. A flashing block indicates in which level you are in the Options settings or File recalling loops. Continuously running bars indicate that the exercise is recorded.

Indicates low battery.

-- Indicates there is no heart rate reception. Bring the wrist receiver up to your chest near the transmitter’s Polar logo.

The receiver starts looking for the heart rate signal again.

Options mode: indicates that you are setting the bike functions Exercise mode: indicates that bike 1 or 2 is on.

File mode: indicates speed, cadence* or distance information.

In the Time of Day display the alarm is on.

Measure mode: beeps if you are exercising outside your target heart rate

zone. Fitness Test mode: sounds an alarm at the end of the fitness test.

Indicates the Interval Trainer.

Indicates continuous interval (Cont).

Exercise mode: indicates the heart rate above the target zone.

Exercise mode: indicates the heart rate below the target zone.

*Optional Polar Cadence Sensor required

Display Texts

ALARM: Indicates the alarm in watch settings.

AM or PM: Are used in 12h time mode. Ex. in 24h time mode 13:00 means 1:00 PM.

AVG: Together with a reading indicates average heart rate.

b0: Indicates that you have no bike settings on.

b1: Indicates bike 1 setting.

b2: Indicates bike 2 setting.

BasicUse: Exercising without settings.

BestLap: Indicates the shortest lap time information.

Cad*: Indicates pedalling speed measured in rounds per minute (RPM).

CONNECT: Communication mode between wrist receiver and computer.

Cont: Up to 30 intervals succeed one another unless the Interval phase is manually stopped. CoolDown: Cool-down phase at the end of an interval training exercise.

E0: BasicUse settings

E1-E5: Indicates which exercise set you have used for the exercise. ExeSet: Start setting your BasicSet (Int OFF) or Interval Training Set (Int On).

Exe. Time: Exercise duration

FILE: Indicates file mode.

FIT. TEST: Indicates fitness test

mode.

FULL: After having stored 99 laps (the use of intervals reduces the amount). FULL appears in the display. You can continue taking lap

M 100

M 101

Page 54
Image 54
Polar S520, S510 manual Display Symbols, Display Texts