Polycom 9.0.6 manual Press Call on the remote control

Getting Started Guide for the VSX Series

Placing an Audio-only Call

You can place an audio-only call from Polycom systems that have Analog Phone or Voice Over ISDN enabled.

To place an audio-only call from your system:

1.On the Place a Call screen, enter the number you want to call. To delete a

digit, press Delete on the remote control.

2.Select Call Type and press on the remote control.

3.Select Phone or Analog Phone.

4.Press Call to place the call.

Adding an Audio-only Call to a Video Call

You can add an audio-only call from Polycom systems that have Analog Phone or Voice Over ISDN enabled.

To add an audio-only call after your video call connects:

1.Press Call on the remote control.

2.Select Add Call.

3.Use the number buttons on the remote control to enter the telephone number of the audio participant that you want to add to your video conference.

4.Specify the Call Type, if applicable.

The available settings depend on your system’s configuration. Not all calls require setting the call type.

5.Press Call on the remote control.

Adding a Video Call to an Audio-only Call

If you are already in an audio-only call, you can add a video call to your call.

To add a video call after your audio-only call connects:

1.On the Place a Call screen, enter the number you want to call.

2.Press Call to place the call.

© Polycom, Inc. 7