Polycom 9.0.6 manual Streaming a Conference to the Web, Starting a Stream

Getting Started Guide for the VSX Series

To transfer a call:

1. While in a call, press on your Polycom system remote control to access the tone pad.

2.Press Dot on the remote to activate flash hook. The first far-site system is placed on hold.

3.Wait for a dial tone, then dial the extension of the far-site system to which you want to transfer the call. The call connects both audio and video between the local system and the second far-site system. The first far-site system is still on hold.

4.Hang up the near-site system. The two far-site systems are now connected in a call with audio and video, if the capabilities are present.

To add a system to a call:

1. While in a call, press on the Polycom system remote control to access the tone pad.

2.Press Dot on the remote to activate flash hook. The far-site system is put on hold.

3.Wait for a dial tone, then dial the extension of the system that you want to add to the call.

4.Press Dot on the remote again. The call becomes an audio-only conference with all of the systems. If the system that dialed the flash hook hangs up, the other systems will be connected in a call with audio and video, if the capabilities are present.

Streaming a Conference to the Web

Starting a Stream

Your Polycom system may be configured to allow you to make point-to-point or multipoint calls available for others to view using a web browser. Users who view the stream need to know the address of the video conferencing system and the system's room password (if any).

To stream a conference:

1.Select System from the Place a Call screen.

2.Select Utilities from the System screen.

3.Select Web Streaming from the Utilities screen.

4.Select the Start Streaming option to begin streaming.

You can start the stream before or during a video call.

© Polycom, Inc. 35