WORKING WITH DIRECTORY ENTRIES
Working with Directory Entries
The directory on your VSX system stores dialing information that helps you make calls quickly and easily. When a site listed in the directory calls your system, the system displays the name on the screen when the call comes in. If a site that calls you is not listed in the directory, you are prompted to save the contact information in the directory when the call ends.
If your system is registered with a global directory server, your directory contains two types of entries:
Local entries: Information about sites that you have added, sites that you have called, and sites that have called you. These entries are stored locally on your VSX system, and depending on your system setup, you can edit these entries. You can also assign local entries to categories to make it easier to find numbers. Local entries are available to anyone who uses the system.
Global entries: Information about other active sites that are registered with the same Global Directory Server. These entries are stored on the global directory server, and you cannot edit them. You can make a local
copy if you want to make changes. Global entries are marked with 
.
Depending on your system configuration, you may also be able to remove or edit names or dialing information in the local directory.
Searching the Directory
You can find entries in the directory by:
Spelling the first or last name using the number buttons on the remote control
Pressing 
Keyboard to use the
Scrolling through the list of names using the arrow buttons on the remote control
Using the alphabet tabs to move through the directory and then scrolling to the name you want
Adding, Editing, and Deleting Directory Entries
You can create entries for
To add a single-site entry to the directory:
1.Press 
Directory on the remote control.
2.Select New and specify that this is an entry for one site.
© Polycom, Inc. | 21 |
