Precor Configuring the M9.5sp Treadmill Default Settings, Configuration, If you want, Then

Configuring the M9.5sp Treadmill Default Settings

The M9.5sp treadmill lets you preset many of the answers to the standard startup prompts. Configuring the default settings eliminates the time it takes to answer all the startup prompts, letting you begin your workout sooner.

Precor has preset several of the default answers at the factory, as shown below:

M9.5sp	Configuration
Distance Mode?	Miles
Speed Mode?	Miles per hour
Program Speed?	Constant
Use Pacer?	No pacer
Use Warmup?	No warmup

To preset answers to many of the prompts, take the following steps. While following these steps, you can press the HELP key at anytime and an explana- tion of your selection will scroll across the top of the display.

1.Locate the ON/OFF switch located at the front of the black hood. Turn ON the treadmill. The prompt, “Press Enter to Begin” appears on the elec- tronic console display.

2.Straddle the running belt with your feet firmly planted on the right and left staging platforms. (Stand close enough to the electronic console so you can extend your arms and touch the keys.)

3.Press the hidden key to access the Configuration and Custom Course modes. The display briefly shows the odometer on your treadmill.

Note: The hidden key is located directly below the STOP key and to the right of the INCLINE key. You can press this key only when the “Press Enter to Begin” prompt appears.

4.At the “Set Configuration?” prompt, use arrows on the left key to answer YES and configure the M9.5sp treadmill default settings.

5.At the “Distance Mode” prompt, select one of the following:

	If you want...	Then...
	To be asked this prompt at the	Press ENTER
	beginning of each session
	Distance measured in Miles	Press
	Distance measured in Kilometers	Press
6. At the “Speed Mode” prompt, select one:
	If you want...	Then...
	To be asked this prompt at the	Press ENTER
	beginning of each session
	Speed measured in MPH	Press
	Speed measured in KPH	Press

page 20