Primera Technology Automated Optical Disc Printing System Hardware and Software Setup, Set-Up

TOC INDEX

Section 2: Hardware and Software Setup

Set-Up

This section will describe the step-by-step process of setting up your Printer. This includes information on how to load the supplies (ink and disc media) necessary to start printing discs.

A. INSTALLING THE PC SOFTWARE

The Installer Disc has a QuickStart menu that will guide you through the process of setting up your duplicator. Please refer to the following for more information on each step:

1.Place the CD/DVD Printer Installer CD in your CDRom Drive. The Installer application should automatically launch in a few moments. If it does, proceed to Step 2. If it does not automatically launch, follow these steps:

•Double-click the My Computer Icon, then double-click the icon of the appropriate CD drive containing the Software Installer disc.

•Double-click Installer.exe

2.In the Installer Application, click the Standard Install button. The on screen instructions will guide you step-by- step through the installation process.

B.INSTALLING THE MAC SOFTWARE

Before installing the software please note that all software must be installed on a hard disk. Once you have installed the software, store the original program CD-ROM in a safe place.

Please note that your user account must have administrative rights to properly install a new printer. You can check with your system administrator or check with Apple support to confirm whether or not your account has administrative rights.

Install the software as follows:

a.Insert the Installation CD-ROM in your system's CD-ROM drive.

b.Double-click the CD-ROM icon.

Hardware and Software Setup 7