S P E C I F Y I N G F O R M S
Emulation
Emulation Epson
Possible Values: Epson*, IBM Proprinter, DEC LA120/LA210, TTY,
Printek, ANSI X3.64, Genicom 3840, Genicom 3410
This item selects the emulation to be used whenever the parallel port is active. The emulation should be set to match the type of printer your software supports.
LAN Setup
Possible Values: On, Off*
LAN Setup Off
This item enables or disables the ability to control the optional Ethernet interface card from the front panel. When set to On, the Serial Interface is not available, and menu items for the Ethernet card follow. Consult your Network Administrator before changing any of these items.
Note: Setting this item to On when the optional Ethernet interface card is not present may result in the printer appearing to “hang” when exiting the Setup Menus. After 15 seconds, a LAN Timeout error will be displayed. Press ONLINE, then enter the Setup Menus and correct the problem.
IP Address Method
Possible Values: Auto*, Static
IP Address Auto
This item controls how the optional Ethernet interface card receives its network address. When set to Auto, the Ethernet card will receive its network address from a network DHCP server (typical installation). When
5 0
