WHERE TO GO FROM HERE
Programming is easy and straightforward if you follow these steps:
1.Turn to Appendix A and review the factory settings for the interface you will be using.
2.Scan the interface enable barcode label if you are changing interfaces.
3.Scan any feature labels that are unique to the interface you are currently programming. These interface specific program- ming labels immediately follow each interface selection label.
5.Turn to the Symbology section if you are going to change any barcode symbologies or modify any symbology related features.
6.Turn to the General Features section of this guide if you wish to change or modify any of the scanner's other features.
Once the necessary changes have been made, and you have scanned the “end” label, you are ready to scan.
GENERAL INFORMATION
7 |
