SOFTWARE CONTROL
XON/XOFF — this is software handshaking that allows the host to control data transmission. If the host sends an XOFF command to the scanner, the scanner will not send the barcode data until it receives an XON command from the host. If the host sends the XOFF command during data transmission, the host will receive no more than two additional characters.
SET -------------------------------------
CONTROL |
| |||
ENABLE CTS/RTS FLOW CONTROL - | ||||
HARDWARE | ||||
| ENABLE CTS SCAN CONTROL | |||
|
| |||
|
|
|
| |
XON/XOFF |
| ENABLE XON/ XOFF | ||
| DISABLE XON/XOFF | |||
|
| |||
|
|
|
| |
END | ||||
RS-232
INTERFACE
19 |
