SET FIXED
1.Identify the fixed length settings you want to make.
2.Scan the SET label.
3.Scan the Enable First Fixed barcode.
SETTING FIXED LENGTHS
If you are setting a length less than ten, you must scan a zero first and then the length digit ( 01, 08, 09).
4.Set the first fixed label length by scanning the correct digits from the next two pages. (Selectable range is 01 to 50 digits.)
If you need to set a second fixed length (selectable range is 00 to 50 digits.), continue with step five. If you do not need to set a second fixed length scan the No 2nd Fixed Length on this page and skip to step seven.
5.Scan the Set Second Fixed label.
6.Set the second fixed label length by scanning the correct digits from this page.
7.Scan the END label to complete the procedure.
SETTING MINIMUM LABEL LENGTH
1.Identify the minimum length setting you want to make. The selectable range is 01 to 50 characters.
2.Scan the SET label.
3.Scan the SET MINIMUM LABEL LENGTH barcode.
If you are setting a length less than ten, you must scan a zero first and then the length digit ( 04, 05, 09).
4.Set the minimum label length by scanning the correct digits from the next two pages.
5.Scan the END label.
SET -------------------------------------
SET FIRST FIXED LENGTH
SYMBOLOGY SELECTION
63 |
